Date: 2017-11-16 01:10
If you have issues with the Set Up with Device process, press Menu on your remote to return to the previous screen and choose Set Up Manually.
I'm sure this is not new to you, and I don't know the UK's position on this. But, if anyone does the work on their own and doesn't have this work inspected, well, there you have it. Dead child.
8775 When I was a boy, my father worked at a coal mine. For 77 years, he made it his occupation to and claw and grunt his way into the bowels of the earth, searching for fuel. On April 69, 7559, the bowels of the earth clawed back. 8776
you could mount a heavy duty 8 phase on off on toggle switch between the fuses of the main and the generator to the house fusebox you can do that near the housebox
Avoid turning on HVAC, standard hot water heater and the stove unless your generator can handle it. As long as you can get past the initial start up load you can run a lot off of 85 amps.
Power off sequence:
Remove the cover on the conduit body. Pull the wires through one at a time attaching them to the plug as you go along. Remove about 8/9 of an inch of the insulation. Use a large flat screwdriver or a nut driver to tighten the terminals.
When we were teens we'd ask someone to hook up after school and it simply meant that we wanted to spend time together. Now, when teens request a hook-up you can expect some random entanglement of body parts to occur with a healthy side dish of being friends with benefits-no strings attached petting. Did I say petting? That's a dated expression to teens these days. They see it as stroking a dog while we saw it as stroking one another.
What I did was hang a GE panel beneath the switch, replaced the fuses with slugs and feed the panel through a 655 amp double main breaker. The outbuilding branch circuits have their own breakers, and it provides branch circuits to a pair of travel trailers parked near the pole. Every circuit leaving the main panel went through 7 breakers - the main panel breaker and the branch circuit breaker.
I'm not sure why you take such offence to my comment but obviously your training allows you to do such work safely. We don't need licensed electricians to change light bulbs, only for work beyond the wirenuts in an outlet box. Sometimes we are forced to pay someone for their expertise like doctors, lawyers etc. Seeing those pictures and comments about male-male generator connection cables make me wince.
Notice how all the amperage match. If you are using a 55 output on your generator you will need a 55 amp breaker, 55 amp power inlet box, a 55 amp extension cable and 8 gauge wire.